Post by Admin on Jul 23, 2014 22:39:38 GMT
These are koni units for a superdream but the principle is the same.....
you will need six large plastic cable ties, make sure shock is on the lowest setting
thread one of the ties up through the spring along it's length and zip together
repeat twice more and spread 120 degrees apart
working round the circumference, zip up each tie bit by bit until you have enough space to remove the retainer or in this case undo the nut to remove the top mount
does anyone know where to get a peg spanner to undo the damper body top plate?
you will need six large plastic cable ties, make sure shock is on the lowest setting
thread one of the ties up through the spring along it's length and zip together
repeat twice more and spread 120 degrees apart
working round the circumference, zip up each tie bit by bit until you have enough space to remove the retainer or in this case undo the nut to remove the top mount
does anyone know where to get a peg spanner to undo the damper body top plate?
